So sánh sản phẩm
BIẾN TẦN 5.5KW 3P 240VAC ATV212HU55M3X

BIẾN TẦN 5.5KW 3P 240VAC ATV212HU55M3X

Liên hệ

Tên sản phầm : Biến tần ATV212
Thông số cơ bản: Công suất 5.5kW (7.5Hp), 3P 240VAC, không tích hợp bộ lọc EMC, cấp độ bảo vệ IP21
Số lượng
Thêm vào giỏ hàng

Share:
Biến tần ATV212- Schneider
Altivar 212 là biến tần dung cho động cơ không đồng bộ 3 pha từ 0,75 kW đến 75 kW.
Nó được thiết kế đặc biệt cho các ứng dụng quản lý chất lỏng thường gặp nhất trong các tòa nhà cấp ba (HVAC): sưởi ấm, thông gió, điều hòa không khí và bơm. Do thiết kế dựa trên năng lượng sinh thái, có thể tiết kiệm năng lượng lên đến 70% so với hệ thống điều khiển truyền thống.
Đặc điểm:
Altivar 212 cung cấp công suất động cơ từ 0,75 kW đến 75 kW trên các nguồn cung cấp sau:
• 200… 240V 3 pha, từ 0,75 kW đến 30 kW, IP 21
• 380… 480V 3 pha, từ 0,75 kW đến 75 kW, IP 21
• 380… 480V 3 pha, từ 0,75 kW đến 75 kW, UL Loại 12 / IP 55
- Phạm vi tốc độ: 1:50
- Độ quá nhiệt thoáng qua: 110% - 60 giây.
- Bộ lọc EMC tích hợp, loại C1 đến C3 tùy thuộc vào kiểu máy
- Bus truyền thông được tích hợp phổ biến nhất trên thị trường: Modbus, METASYS N2®, APOGEE FLN P1® và BACnet®. Tùy chọn: LonWorks
- Tuân theo các tiêu chuẩn và chứng nhận quốc tế: UL, CSA, C-Tick và NOM
- Công nghệ Antiharmonic cho phép đạt được THDI <30%
Lợi ích
- Xem ngay mức tiêu thụ năng lượng.
- Phát hiện các hư hỏng để can thiệp nhanh chóng: đứt dây curoa, bơm chạy khô, hỏng pha, lỗi nguồn cung cấp, v.v.
- Bảo trì phòng ngừa để giảm chi phí và tối ưu hóa thiết bị: cảnh báo lỗi, thời gian vận hành, v.v.
- Kết nối với mạng giám sát tòa nhà bằng các giao thức nhúng.
- Tập trung vào sự thân thiện với người dung
- Các công cụ để cài đặt, tham số và xem cài đặt (thiết bị đầu cuối đồ họa từ xa bằng 6 ngôn ngữ, Multi-Loader, Bluetooth và SoMove Mobile).
- Kích thước nhỏ gọn.
- Bảo trì đơn giản.
- Các chức năng dòng “Tòa nhà” chuyên dụng (chế độ cháy, giám sát đăng ký, chức năng bảo vệ cơ khí, v.v.
- Tích hợp bộ lọc EMC, công nghệ chống nhiễm điện (THDI ˜ 30%).
Các ứng dụng
- Thông gió:
+ Ít ô nhiễm tiếng ồn (tiếng ồn thủy lực, tiếng ồn động cơ, v.v.).
+ Phát hiện đứt thành phần truyền động.
+ Hút khói: bắt đầu bắt đầu với ức chế lỗi.
- Hệ thống sưởi và điều hòa không khí:
+ Tối ưu hóa khả năng kiểm soát trong quá trình xử lý chất lỏng.
+ Sử dụng bộ điều khiển PID (nhiệt độ, tốc độ dòng chảy, áp suất, v.v.).
+ Tốc độ dòng chảy có thể điều chỉnh để quản lý năng lượng tốt hơn.
+ Sự triệt tiêu cộng hưởng cơ học.
- Bơm:
+ Phát hiện thiếu tải / quá tải, máy bơm chạy khô.
+ Cấu hình nhiều động cơ.
+ Giới hạn thời gian hoạt động ở tốc độ thấp.
+ Chức năng Sleep / Wake.
+ Giảm áp suất tăng áp để kéo dài tuổi thọ của lắp đặt.
 
  • Doanh nghiệp:
    CÔNG TY CỔ PHẦN TỰ ĐỘNG HOÁ ĐÔNG DƯƠNG
  • Địa chỉ:
    Số 80 phố Cù Chính Lan, Khương Mai, Thanh Xuân, Hà Nội,
  • Điện thoại:
    083 858 8080
  • Email:
    hotline.indochina@gmail.com

Thông số kỹ thuật

Main
device short name ATV212
product destination Asynchronous motors
network number of phases 3 phases
motor power kW 5.5 kW
motor power hp 7.5 hp
supply voltage limits 170…264 V
supply frequency 50...60 Hz - 5...5 %
line current 17.3 A at 240 V
20.8 A at 200 V
range of product Altivar 212
product or component type Variable speed drive
product specific application Pumps and fans in HVAC
communication port protocol METASYS N2
APOGEE FLN
LonWorks
BACnet
Modbus
[Us] rated supply voltage 200...240 V - 15...10 %
EMC filter Without EMC filter
IP degree of protection IP21
Complementary
apparent power 9.2 kVA at 240 V
continuous output current 24.2 A at 230 V
maximum transient current 26.6 A for 60 s
speed drive output frequency 0.5…200 Hz
speed range 1…10
speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn
local signalling 1 LED (red) for DC bus energized
output voltage <= power supply voltage
isolation Electrical between power and control
type of cable Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR
Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC
With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
electrical connection VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14
L1/R, L2/S, L3/T: terminal 16 mm² / AWG 6
tightening torque 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
2.5 N.m, 22 lb.in (L1/R, L2/S, L3/T)
supply Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 A, protection type: overload and short-circuit protection
Internal supply: 24 V DC (21…27 V), <200 A, protection type: overload and short-circuit protection
sampling duration 2 ms +/- 0.5 ms F discrete
2 ms +/- 0.5 ms R discrete
2 ms +/- 0.5 ms RES discrete
3.5 ms +/- 0.5 ms VIA analog
22 ms +/- 0.5 ms VIB analog
response time FM 2 ms, tolerance +/- 0.5 ms for analog output(s)
FLA, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
FLB, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
RY, RC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
accuracy +/- 0.6 % (VIA) for a temperature variation 60 °C
+/- 0.6 % (VIB) for a temperature variation 60 °C
+/- 1 % (FM) for a temperature variation 60 °C
linearity error VIA: +/- 0.15 % of maximum value for input
VIB: +/- 0.15 % of maximum value for input
FM: +/- 0.2 % for output
analogue output type FM switch-configurable voltage 0...10 V DC, impedance: 7620 Ohm, resolution 10 bits
FM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits
discrete output type Configurable relay logic: (FLA, FLC) NO - 100000 cycles
Configurable relay logic: (FLB, FLC) NC - 100000 cycles
Configurable relay logic: (RY, RC) NO - 100000 cycles
minimum switching current 3 mA at 24 V DC for configurable relay logic
maximum switching current 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)
5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)
2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)
2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)
discrete input type F programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
R programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
RES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
discrete input logic Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1)
Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1)
dielectric strength 2830 V DC between earth and power terminals
4230 V DC between control and power terminals
insulation resistance >= 1 mOhm 500 V DC for 1 minute
frequency resolution Display unit: 0.1 Hz
Analog input: 0.024/50 Hz
communication service Read holding registers (03) 2 words maximum
Write multiple registers (16) 2 words maximum
Write single register (06)
Time out setting from 0.1 to 100 s
Monitoring inhibitable
Read device identification (43)
option card Communication card for LonWorks
power dissipation in W 249 W
air flow 85 m3/h
specific application HVAC
Variable speed drive application selection Building - HVAC Compressor for scroll
Building - HVAC Fan
Building - HVAC Pump
Motor power range AC-3 4…6 kW at 200…240 V 3 phases
motor starter type Variable speed drive
discrete output number 2
analogue input number 2
analogue input type VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits
VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits
VIB configurable PTC probe: 0...6 probes, impedance: 1500 Ohm
VIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits
analogue output number 1
physical interface 2-wire RS 485
connector type 1 open style
1 RJ45
transmission rate 9600 bps or 19200 bps
transmission frame RTU
number of addresses 1…247
data format 8 bits, 1 stop, odd even or no configurable parity
type of polarization No impedance
asynchronous motor control profile Voltage/frequency ratio - Energy Saving, quadratic U/f
Flux vector control without sensor, standard
Voltage/frequency ratio, 2 points
Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
Voltage/frequency ratio, 5 points
torque accuracy +/- 15 %
transient overtorque 120 % of nominal motor torque +/- 10 % for 60 s
acceleration and deceleration ramps Linear adjustable separately from 0.01 to 3200 s
Automatic based on the load
motor slip compensation Not available in voltage/frequency ratio motor control
Adjustable
Automatic whatever the load
switching frequency 6...16 kHz adjustable
12...16 kHz with derating factor
nominal switching frequency 12 kHz
braking to standstill By DC injection
network frequency 47.5...63 Hz
prospective line Isc 22 kA
protection type Overheating protection: drive
Thermal power stage: drive
Short-circuit between motor phases: drive
Input phase breaks: drive
Overcurrent between output phases and earth: drive
Overvoltages on the DC bus: drive
Break on the control circuit: drive
Against exceeding limit speed: drive
Line supply overvoltage and undervoltage: drive
Line supply undervoltage: drive
Against input phase loss: drive
Thermal protection: motor
Motor phase break: motor
With PTC probes: motor
width 180 mm
height 232 mm
depth 170 mm
net weight 6.1 kg
Tên sản phầm : Biến tần ATV212
Thông số cơ bản: Công suất 5.5kW (7.5Hp), 3P 240VAC, không tích hợp bộ lọc EMC, cấp độ bảo vệ IP21

Chat Facebook